172
■ 22. Adjusting the Reference Position
1. Pull the crown out to position 1 and turn
to align the mode hand with CHR.
2. Pull the crown out to position 2. The
hands will move rapidly and stop at the
reference position (12:00 position)
recorded in the watch memory.
3. When the upper right button (B) is
pressed for more than 2 seconds, CHA
flashes in digital display 2 and the watch
enters the reference position correction
status.
Button (A)
Digital display 2
Button (B)
Hour, minute
and second
hands
UTC hour
and minute
hands
24-hour hand
Charge
level
indicator
Mode hand
To Next Page
Loading...
