156
<Using the timer>
1. A confirmation tone will sound each time you press the upper right button (B) to start
and stop the measurement.
• RUN (run) is displayed in digital display 2 during measurement, and STP (stop) is
displayed when the timer is stopped. The measurement mark comes on during
measurement.
2. Press the lower right button (A) during measurement to return to the initial set time and
start measurement again. (Flyback function)
3. Press the lower right button (A) while the timer is stopped to return to the initial set time.
• Digital display 2 changes to RES.
[Digital display 2]
Measurement
mark
[Digital display 1]
Button (B)
Button (B)
To Next Page
Loading...
