Citizen u680 - LED Lights; Resetting Your Watch

170
■ 20. LED Lights
• Press the upper right button (B) while the crown is in the normal position to turn on the LED lights of
digital displays 1 and 2 for 2 seconds. However, note that the lights do not come on in the following
cases.
* During timer mode or chronograph mode
* During radio wave reception
* During 2-second interval movement (insufficient charge warning status)
■ 21. Resetting Your Watch
• If the watch displays or operates abnormally due to a strong impact or the effects of static electricity,
reset the watch and then correct the reference position.
[Caution] After resetting, all the mode settings return to their initial settings. Perform the settings
again as required.
<Initial settings after resetting>
• Home city/world city: UTC • Time: 0:00:00
• Date: January 1, 2008 (Tuesday) • Timer: 99 minutes 00 seconds
• Chronograph: 0 hours 00 minutes 00 seconds (reset status)
• World time: City displays - all SET, daylight saving time - all OF (off)
• Alarm 1/2: City - UTC, time - 12:00, set - OF (off)
• Receive set: Daylight saving time - AU, automatic reception - AUT