Citizen u680 - Daylight Saving Time

168
<Setting procedure>
1. Pull the crown out to position 1 and turn to align the mode hand with RX-S (receive
set mode).
2. Pull the crown out to position 2 to enter the daylight saving time (SMT) reception
setting status.
• AU or mA flashes and the watch enters the correction status.
• Each time the upper right button (B) is pressed, the display switches between the
daylight saving time reception setting and the automatic reception setting.
3. Press the lower right button (A) to select AU or mA.
[Daylight saving time
reception setting]
Button (A)
Button (B)
Button
(A)
Button
(A)
Turn the crown
Button (A)
[Regular automatic reception setting]