ci5000 Series Printer Operation Guide
Version 1.0 5-3
4. Check the printhead for buildup of ink deposits and when necessary, use the appropriate
Cleaning Solvent compatible with the type of Ink being used. Pay particular attention to the
Nozzle Plate, Charge Electrode, Phase Detector, HV Plates and Gutter Block. 检查打印头是否有
淤积的墨水，如果需要，使用和清洗液相匹配的清洗液清洗。特别留意喷嘴，充电槽，相位传感器，
高压偏转板和回收管。
5. Use a suitable container to catch the excess cleaning solvent and dispose of it in accordance with
local regulations 使用合适的容器接收多余的清洗液并依照当地的法规处置。
Low-pressure dry, clean air 低压清洁的压缩空气
Nozzle Plate 喷嘴
Charge Electrode 充电槽
Phase Detector 相位传感器
HV Plates 高压偏转板
Gutter Block 回收管
To Next Page
Loading...
