ci5000 Series Printer Operation Guide
Version 1.0 5-9
When the Service module has expired an error warning is presented as shown below. 当过滤器模块
使用寿命到期（剩余时间为 0），机器上会显示如下图展示的故障
Clear Error 清除故障
清除故障清除故障
清除故障
Press the [OK] button to clear the error as shown above. The following screen will display the hours
remaining. When ready to replace the Service Module first ensure the jet and pump is off (see below). 按
“确定”键清除上图显示的故障。屏幕最下方会显示剩余的时间。当更换“快易护”模块的时候，首先确
认墨线和墨泵已经关闭（见下图）
To Next Page
Loading...
