Need help?Do you have a question about the Claas QUADRANT 3400 and is the answer not in the manual?
General| Model | QUADRANT 3400 |
|---|---|
| Type | Large Square Baler |
| Number of Knotters | 6 |
| Bale Channel Width | 120 cm |
| Bale Weight | Up to 500 kg |
| Pickup Width | 235 cm |
Details on using the manual, including texts, figures, formatting, and reference symbols.
Covers technical specifications, identifying reasons for damage, and safeguarding the machine.
Guidance on using original parts, requesting technical assistance, and gearbox removal.
Notes on welding work and instructions for tensioning steel roller chains.
Details on installing and dismantling taper ring assemblies, including cautions and warnings.
Instructions for cleaning, matching, and installing gib head keys, with caution regarding damage.
Guidance on self-locking bolts, their application, and proper use of liquid locking compound.
Procedures for installing bearings and ferrule fittings on hydraulic lines.
Details on pre-assembly, final assembly, and unsealed connectors for hydraulic fittings.
Instructions for progressive and taper fittings on hydraulic lines, including assembly and installation.
Guidelines for hydraulic bolt connectors and instructions on proper hose routing to avoid damage.
Advice on preventing hose damage from external effects, heat, and tips for speedy repair work.
Includes aligning pulleys, maintaining hydraulic cleanliness, and running machines at low speed post-repair.
Provides tightening torques for metric standard threads based on property class and dimensions.
Lists tightening torques for metric fine threads based on property class and dimensions.
Provides tightening torques for hydraulic screw fittings with ferrule according to DIN 3861.
Lists tightening torques for hydraulic screw fittings and AC fittings with sealing cone and O-ring.
Provides tightening torques for hydraulic male connectors with different sealing types and dimensions.
Lists tightening torques for hydraulic connectors with sealing edges and O-rings for various dimensions.
Provides tightening torques for direction-adjustable hydraulic male connectors based on ISO standards.
Lists tightening torques for hydraulic swivelling screw fittings based on dimensions and series.
Provides tightening torques for hollow screws DIN 7643 based on their dimensions.
Lists tightening torques for brake line screw fittings with and without copper sealing rings.
Provides tightening torques for screw thread clamps and wheel nuts for tandem and trailing axles.
Notes that all information regarding lubricants can be found in the current Operator's manual.
Defines the CCN standard for hydraulic and electric systems, based on machine functions.
Explains the subdivision of electric system components by function using letters.
Describes the subdivision of hydraulic system components by function using number ranges.
Provides important safety notices, identification of warning and danger signs with pictograms.
Outlines general safety rules, accident prevention advice, and technician clothing requirements.
Provides procedures for safely leaving the machine and performing adjustment/maintenance work.
To Next Page