Radio Mode Operations
Recalling a preset station
A total of 24 preset positions
(
6-FM1, 6-FM2, 6-
FM3, 6-AM1
)
exists to store individual radio sta
-
tions in memory.
There are 2 methods to recall a preset station.
Method 1:
3 - 1 .
Select “P.CH MEMORY”.
3 - 2 .
Touch
[ ]
key to enter detail setting stage.
3 - 3 .
Slide along
[
]
slider or touch
[
]
/
[
]
key
to select the desired preset station.
3 - 4 .
Touch
[
ENT
]
key for less than 1 second to
recall the stored radio frequency.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a previ-
ously stored station remains un-overwritten at
the memory position.
3 - 1 .
Select “AUTO STORE”.
3 - 2 .
Touch
[
ENT
]
key to start performing auto
store function.
3 - 3 .
The stations with good reception are stored
automatically to the preset channels.
∗
If auto store is performed in the FM bands,
the stations are stored in FM3 even if FM1 or
FM2 was chosen for storing stations.
∗
“AUTO STORE” will appears in the display.
ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Touch and hold the
[ ]
key for 2 seconds.
Instant station recall
(
ISR
)
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a key. The ISR function even operates
with the unit in other modes.
Recalling a station with ISR
In any mode, touch the
[ ]
key to turn on the
radio function and tune the selected radio sta-
tion.Touch the
[ ]
key again to return to the
previous mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for Radio stations.
3 - 1 .
Select “TITLE INPUT”.
3 - 2 .
Touch
[ ]
key to enter detail setting stage.
3 - 3 .
Touch
[
]
/
[ ]
key to move the cursor.
3 - 4 .
Slide along
[
]
slider or touch
[
]
/
[
]
key to input the text.
3 - 5 .
Touch and hold the
[
ENT
]
key for 2 seconds
or longer to store the title into memory.
∗
Entered titles will be deleted when back up
power is disconnected.
3 - 1 .
Select “PRESET SCAN”.
3 - 2 .
Touch
[
ENT
]
key to start scan preset chan
-
nel.
3 - 3 .
When a desired station is tuned in, touch
the
[
]
/
[
]
key to continue receiving that
station.
Method 2:
1.
Touch the
[ ]
key to select the desired band.
2.
Slide along
[
]
slider or touch
[
]
/
[
]
key
to select the desired preset station.
3.
Touch
[
ENT
]
key to recall the stored radio
frequency.
To Next Page
Loading...
Need help?
General
