English
9
FZ502E
Bluetooth Operations
3. Press the [CONTROL] knob (push) to dial.
4. Press the [CONTROL] knob (right) to
terminate call.
• Dialled/Missed/ Received
You can search any Dialled / Missed /
Received.
1. Rotate the [CONTROL] knob to select
“DIALLED”, “MISSED” , “RECEIVED”.
2. Press the [CONTROL] knob to enter the
selected call history.
3. Press the [CONTROL] knob to scroll the
contacts.
4. When the contact name or mobile phone
No. is displayed, press the [CONTROL]
knob (push) to call the mobile phone No.of
that contact.
* Press the [CONTROL] knob (right) to end
the call.
• Call from Phonebook
User can search the contact name in the
phonebook and make call.
1. Rotate the [CONTROL] knob to select
“USER PHONEBOOK” .
2. Press the [CONTROL] knob to enter the
selected.
3. Rotate the [CONTROL] knob to scroll the
contacts.
4. The phone number and the name to
scroll display.When the contact name is
displayed, press the [CONTROL] knob
(push) to call the mobile phone No. of that
contact.
* Press the [CONTROL] knob (right) to end
the call.
Notes:
• Some mobile phones may not be able to
transfer data of Phonebook.
• After RESET, please wait few minutes
until data transferred following to the
Bluetooth mode selection. During that,
“PHONEBOOK UPDATING” is on the
display.
• Redial
You can call last dialed number.
Press the [CONTROL] knob (up) to enter
redial.
Press the [CONTROL] knob (push) to dial
when display ”REDIAL”.
•
Transfer Call
You can switch Handsfree call and mobile
phone call.
Press the [CONTROL] knob (left) button
during call.
• Answering a call
You can answer an incoming call by
pressing the [CONTROL] knob (left).
* Press the [CONTROL] knob (right) to
reject an incoming call.
• Answering a call
You can answer an incoming call by
pressing the [CONTROL] knob.
* Press the [CONTROL] knob (right) to
reject an incoming call.
Audio Streaming Operations
What is audio streaming?
Audio streaming i s a technique f o r
transferring audio data such that it can be
processed as a steady and continuous
stream. Users can stream music from their
external audio player to their car stereo
wirelessly and listen to the tracks through
the car’s speakers. Please consult your
nearest Clarion dealer for more information
on the product of wireless audio streaming
transmitter offered.
CAUTION
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise or sound choppy
on the song playback.
Audio streaming may or may not resume
after telephone interrupt as this is
dependent on mobile phone.
System will always return to Radio mode
if audio streaming is disconnected.
Bluetooth Operations
Note:
Be sure to read the chapter “Pairing” before
proceeding.
Play / Pause a track
1. Press the [CONTROL] knob (down) or
[ ] button on the remote control to
pause audio playback.
2. To resume audio playback, push the
[CONTROL] knob (down) or [ ] button
on the remote control again.
Selecting a track
Track-up
1. Press the [CONTROL] knob(right) or
[ ] button on the remote control to
move to the beginning of the next track.
2. Each time the [CONTROL] knob(right)
or [ ] button on the remote control is
pressed, playback proceeds to another
track in the advancing direction.
Track-down
1. Press the [CONTROL] knob(left) or
[
] button on the remote control to
move to the beginning of the previous
track.
2. Each time the [CONTROL] knob(left)
or [
] button on the remote control is
pressed, playback proceeds to previous
track in the reverse direction.
Note:
Playing order will depend on Bluetooth
audio player. When press the [CONTROL]
knob(left) or [ ] button on the remote
control is pressed, some A2DP devices will
restart the current track depends on the
duration of playback.
During music streaming playback, “A2DP
and HFP” will be shown on the display.
Information about tracks (e.g. the elapsed
playtime, song title, etc.) cannot be
displayed on this unit. When A2DP device is
disconnected, “BLUETOOTH DISCONNECT”
will be shown on the display and return to
previously selected audio source. Some
Bluetooth
audio players may not have play
/ pause synchronized with this unit. Please
make sure both device and main unit are in
the same play / pause status in BT MUSIC
mode.
ID3 display
During music streaming playback, for music
information that is longer than the display
panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g:
ALBUM->TITLE->ARTIST..
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other
ID3 TAG information by press the [DISP]
button on the remote control.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
