3.8 Watching the simulation of the route
You can run a simulated navigation that demonstrates the active route. Do as follows:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap
.
3. Tap
.
4. Scroll down the list and tap
. The simulation starts from the starting point of the
route, and using a realistic speed, it leads you through the whole recommended route.
1. (optional) You have the following controls during the simulation (the control buttons disappear
after a few seconds but you can open them again if you tap the map):
•
: Jump to the next route event (maneuver).
•
: Pause the simulation.
•
: Jump to the previous route event (maneuver).
80 NX404 English
To Next Page
Loading...
