51
NX404
English
English
Owner’s Manual
USB DEVICE
Problem Cause Measure
USB device cannot be inserted. The USB device has been
inserted with wrong direction.
Reversing the connection
direction of the USB device, try
it again.
The USB connector is broken. Replace with a new USB
device.
USB device is not recognized. The USB device is damaged. Disconnect the USB device
and reconnect. If the device
is still not recognized, try
ʽÈĹ»ÁÆ¿ÏÁÌÀ¹¼ÁŰ½Ê½ÆÌ
device.
Connectors are loose.
No sound heard with the
display “NO FILE” shown.
ÇˀƯŲĽÁËËÌÇʽ¼ÁÆ
the USB device.
ÌÇʽÌÀ½Ë½ŲĽËÈÊÇȽÊÄÑÁÆÌÀ½
USB device.
Sound skips or is noisy. ˀƯŲĽ˹ʽÆÇÌ
encoded properly.
˽ˀƯŲĽ˽ƻǼ½¼
properly.
The video image of iPod/
iPhone is disturbed.
The TV Signal setting of the
iPod/iPhone is not set correctly.
Set the TV Signal setting
(NTSC/PAL) of the iPod/iPhone
correctly.
Bluetooth
Problem Cause Measure
Cannot pair the Bluetooth
enable device with the car
audio system.
The device does not support
ÌÀ½ÈÊÇŲĽËʽÉÍÁʽ¼¾ÇÊÌÀ½
system.
Use another device to connect.
The Bluetooth function of the
device is not enabled.
Refer to the user manual of the
device for how to enable the
function.
The audio quality is poor after
connection with a Bluetooth
enabled device.
The Bluetooth reception is
poor.
Move the device closer to the
car audio system or remove
any obstacle between the
device and the system.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
