To Next PageTo Next PageWhat to do if Clarion NX509E sound is bad directly after power is turned on?
If the sound quality of your Clarion Car Video System is poor immediately after turning it on, water droplets may have formed on the internal lens due to the car being parked in a humid place. Let it dry for about 1 hour with the power on.
What to do if Clarion NX509E Car Video System remote control unit does not work?
If the remote control unit for your Clarion Car Video System does not work, it may be because direct sunlight is falling on the light-receptive part of the unit. Also, check the battery of the remote control unit to ensure it is not dead or missing.
Why is my Clarion Car Video System USB device not recognized?
If your Clarion Car Video System doesn't recognize the USB device, it could be damaged. Disconnect the USB device and reconnect. If the device is still not recognized, try replacing it with a different USB device. Another possible cause is loose connectors.
What to do if my Clarion NX509E Car Video System disc cannot be loaded?
If your Clarion Car Video System disc cannot be loaded, it may be because another disc is already loaded. Eject the disc before loading the new one. It could also be due to foreign matter already in place. Eject the foreign matter forcibly.
What to do if nothing happens when buttons are pressed on my Clarion Car Video System?
If nothing happens when you press the buttons or the display is not accurate on your Clarion Car Video System, the microprocessor may have malfunctioned due to noise or other factors. Turn off the power and press the Reset button with a thin rod. Note that when the Reset button is pressed, turn off the ACC power. The frequencies of radio stations, setting data, etc. stored in memory are not cleared even when the Reset button is pressed.
What to do if sound skips or is noisy on Clarion Car Video System?
If the sound skips or is noisy on your Clarion Car Video System, the disc may be dirty. Clean it with a soft cloth. Alternatively, the disc may be heavily scratched or warped; replace it with a disc that has no scratches. Finally, the MP3/WMA/AAC files may not be encoded properly; use properly encoded files.
Why is the display dark on my Clarion NX509E Car Video System?
A dark display on your Clarion Car Video System can occur for several reasons. The dimmer control might be set too low, so try adjusting it properly. Also, if the temperature inside the vehicle is 0°C or lower, set to an appropriate temperature (25°C or so) and check it again. Furthermore, the display darkens at night to prevent glare when the vehicle's headlights are lit; this can also occur in the daytime.
General| Brand | Clarion |
|---|---|
| Model | NX509E |
| Category | Car Video System |
| Language | English |
Lists playable disc formats and media files, including notes on compatibility.
Cautions regarding operation panel handling, cleaning, and touchkey usage.
Explains the function of the remote control sensor and volume adjustment buttons.
Details how to operate the DVD Video mode, including options and setup screens.
Guides on accessing and navigating the Audio settings screen.
Explains the 4 types of sound tone adjustment functions available.
Guides through adjusting sound settings like Beat EQ, Balance/Fader, and others.
Guides on adjusting custom tone settings for Bass, Mid, and Treble.
Guides on customizing various monitor settings.
Details how to adjust the volume using the VOL +/- buttons.
Explains how to open, close, and adjust the angle of the operation panel.
Provides steps to adjust the operation panel angle to the desired position.
Provides notes on handling, storage, cleaning, and precautions for discs.
Guides on how to insert a disc and how the system switches modes.
Provides instructions on how to eject a disc from the player.
Details USB connectivity, playable devices like iPod and USB memory.
Safety precautions and steps for connecting a USB media device.
Safety precautions and steps for disconnecting a USB media device.
Guides on changing the media source and lists available media modes.
Explains the 2-Zone function for independent audio output to main and sub zones.
Instructions on how to listen to the radio, including tuning methods.
Guides on selecting and starting DVD Video playback.
Explains how to access and change DVD system settings.
Guides on setting the parental level for content restriction.
Details on watching DVD videos, volume, and DVD menu operations.
Guides on listening to an audio CD.
Explains MP3, WMA, and AAC file formats and their compression.
Important precautions for playing MP3, WMA, and AAC files.
Important precautions for playing DivX files.
Steps to select and start DivX file playback.
Guides on watching DivX movies and handling authorization data.
Guides on connecting and operating an iPod with the system.
Details on controlling iPod playback, including operation keys and modes.
Guides on selecting tracks to play from lists like Videos, Playlists, Artists.
How to enjoy video data from an iPod on the unit's screen.
General and specific notes for using USB memories.
Specifics about MP3, WMA, AAC file playback from USB.
Guides on selecting and starting playback from a USB memory device.
Details on operating playback for files on USB memory.
Steps to select and enter AUX mode for external inputs.
Lists common problems and their solutions for the general operation.
Lists DVD player error codes and their corresponding solutions.
Lists USB device error codes and their corresponding solutions.
Essential safety precautions for installing the unit.
Warnings and cautions related to installation locations and methods.
Instructions for installing the main unit in NISSAN and TOYOTA vehicles.
Specific steps for installing the main unit in NISSAN vehicles.
Specific steps for installing the main unit in TOYOTA vehicles.
