Clarion NX700 Service Manual

NX700/NX700E
- 23 -
2-2. Installation of MAIN PWB
No. PARTS CODE
Q'T
Y
1. Attach processed Main PWB * Fit at 4 tabs.
on processed DVD mechanism.
2. Fix it with IT screw(A). A 780-2604-50 4 * Follow screw sequence. (1 to 4)
< Only NX700E(QY-5015E-A) >
3. Put ANT-lead of Main PWB
on the upper chassis.
The point is temporarily stopped
with the masking tape. (Fig.1)
4. Confirm that the direction of dashin
g
ou
t
of ANT-lead from Main PWB
and the silk print of PWB
are the same direction.
5. Insert FPC on the Main PWB side
in the socket of the DVD mechanism.
6. Check an insertion and a lock state
of FFC of socket(J401) of Main PWB.
< Only NX700E(QY-5015E-A) >
7. Attach side chassis R B 312-0504-00 1 * Attach it from the front plate side
on the right side of Main unit, diagonally.
and fix it with machine screw
(
C
).
C 714-2604-8B 2 * Fit at 2 dowel
s
on front plate side,
on upper chassis.
< Onl
y
NX700E
(
QY-5015E-A
)
>
* Attach the side chassis R,
confirm ANT-lead doesn't crowd.
WORKING DIAGRAM WORKING PROCESS WORKING POINT
Insert FPC
on the socket of
DVD mechanism.
processed
DVD mechanism
processed
Main PWB
A
A
B
C
Attach it from the
front plate side
(
1
)
(
2
)
(
3
)
(
4
)
tab
tab
tab
tab
dowel
ANT-lead
(Fig.1)
ANT-lead
㫄㪸㫊㫂㫀㫅㪾㩷㫋㪸㫇㪼
ANT-lead

Clarion NX700 Specifications

General

Brand	Clarion
Model	NX700
Category	Car Receiver
Language	English