Clarion NZ503 - Page 53

10 NZ503
English
Owner’s Manual
[ ]"UTTON
s0RESSTOPLAYPAUSEAUDIOORVIDEO
s0RESSTO-54%IN4UNERMODE
s0RESSANDHOLDTOSTOPAUDIOORVIDEOlLES
[VOL+][VOL-]"UTTONS
s 0RESSTO)NCREASEANDDECREASEVOLUME
[OPEN]"UTTON
s0RESSTHISBUTTONTOOPENCLOSE4&4PANEL
s0RESSANDHOLDTOENTER4&4PANELANGLESETTING
options.
[MENU/POWER] button
s 0RESSTHISKEYTOPOWERONTHESYSTEMINPOWEROFF
mode.
s +EEPPRESSINGTHISKEYMORETHANSECONDTOTURN
off the system when system is in power on mode.
s 0RESSTHISBUTTONTODISPLAYMAINMENUPRESSAGAIN
to return current source when system is in power on
mode.
[BND/END PS]"UTTON
BND Function:
s0RESSTHISBUTTONTOENTER!-&-TUNERMODEFROM
any source.
s/NCEIN!-&-TUNERMODEYOUCANPRESSINTO
CHANGEBANDSAMONG&-&-&-!-BANDS
s0RESSANDHOLDTOSTART0RESET3CAN0RESSAGAINTO
stop.
END Function:
/NLYBEAVAILABLEWHENACALLINCOMINGORINTELEPHONE
talking.
s0RESSTOREJECTCALLWHENACALLINCOMING
sPRESSTOENDACALLWHENINTELEPHONETALKING
[ISR/SEND]"UTTON
ISR Function:
When in tuner mode, press and hold this button for
SECONDSTOSAVECURRENTSTATIONANDBANDTO)32
memory, and at the same time, the tuner will enter
)32MODEWITHCURRENTSTATION
Note:
In ISR mode, the tuning operation is disabled. Press
this button again to quit ISR mode.
When in the other mode but not tuner mode, press
this key will go to ISR memory station directly, it likes a
shortcut. Press this key again to go back to previous
mode.
SEND Function:
/NLYBEAVAILABLEWHENTHEREISACOMINGCALL
s0RESSTHISKEYTOACCEPTTHECOMINGCALL
s0RESSTOSWITCHTOPRIVATEMODEWHENINTALKING
[IR] SENSOR
s2ECEIVERFORTHEREMOTECONTROLUNITOPERATINGRANGE
DEGREEINALLDIRECTIONS
[microSD]
s )NSERTAMICRO3$INTHIS
Note: The microSD card is only for navigation. Please
don’t remove it, otherwise, the navigation function will
be disabled.