Clarion NZ503 - Selecting the Bluetooth Audio Player; Controlling the Bluetooth Audio Player

38 NZ503
English
Owner’s Manual
4. Touch your desired Device and press the [ ]
KEYTOREGISTERFORTHE"LUETOOTHAUDIOPLAYER
)FENTERINGTHE0ASS+EYCODEISPROMPTEDONYOUR
"LUETOOTHAUDIOPLAYERENTERTHE0ASS+EYCODESET
to this unit.
s 9OUCANCHANGETHE0ASSKEYSETTINGOFTHISUNIT
FROMTHE"4)NFOSCREEN
s 9OUALSOCANADDTHEFAVORITEICONTOTHECONNECTED
device. There are 10 favorite icons for selection.
When the pairing operation completes, the registered
"LUETOOTHAUDIOPLAYERISSETASTHECURRENTDEVICE
after selecting the favorite icon, the display return to
THEDEVICELISTSCREEN0RESS[
] button, the display
WILLRETURNTOTHE"LUETOOTHAUDIOMODESCREEN
Note:
s9OUCANNOTREGISTERTHESAME"LUETOOTHAUDIOPLAYER
WHICHISALREADYREGISTERED)FYOUWISHTOCHANGETHE
Device key registered, once delete the corresponding
Bluetooth audio player from the previous Device key,
and then register it again to your desired Device key.
s4ODELETETHE"LUETOOTHAUDIOPLAYERREGISTRATION
1. Touch the [
=KEYTODELETETHEDEVICE
!CONlRMATIONSCREENISDISPLAYED
2. Touch the [
=KEYTOCONlRMDELETE
Selecting the Bluetooth audio player
4OCHANGETHECURRENT"LUETOOTHAUDIOPLAYERTOTHE
other device which is already registered, perform the
following operation.
1. Touch the Device key to [
] display the Device
3ELECTSCREEN
2. Touch the currently connected device, then press
the [
] key to disconnect the active device.
3. Touch the desired Device key you wish to use.
0RESS[
] key to select it as your active device.
The corresponding cellular phone is set as current
telephone.
s )FTHEPOWEROFTHECELLULARPHONEISNOTTURNEDON
turn it on.
s 4HECELLULARPHONEMAYPROMPTTOACKNOWLEDGETHE
"LUETOOTHCONNECTIONORASKTOENTERTHE0ASS+EY
code of this unit.
0ERFORMTHESEOPERATIONSACCORDINGTOTHEMESSAGE
displayed.
4. Touch the [
] key to return to the previous
screen.
Controlling the Bluetooth audio player
Note:
s/CCASIONALLYDEPENDINGONTHEENVIRONMENTPLAYBACK
sounds may be fragmented, or switch noises may be
generated.
Playing a music
!FTERTHECONNECTIONWITHA"LUETOOTHAUDIOPLAYERIS
established, the play mode is automatically engaged.
s 7HENPLAYBACKISNOTSTARTEDFORSOMEDEVICES
touch the [
] key manually.
Pausing playback
1. Touch the [ ] key during playback.
0LAYBACKPAUSES
2. To resume playback, touch the [
]KEY0LAYBACK
resumes.
Skipping a track (searching)
0RESSTHE[ ] or [ ] button during playback.
Tracks are skipped, as many as the times the button is
pressed, and playback starts.
Stopping playback
0RESSTHE[ ] button during playback.
Tracks are stopped, press the [
] button to
PLAYBACKTHElRST4RACK