Clarion NZ503 - Select the Cellular Phone; Obtaining the Phone Book Data; Telephone Operations

41NZ503
English
English
Owner’s Manual
Note:
s9OUCANNOTREGISTERTHESAMECELLULARPHONEWHICHIS
ALREADYREGISTERED)FYOUWISHTOCHANGETHE#ELLULAR
key registered, once delete the corresponding cellular
phone from the current Cellular key, and then register it
again to your desired Cellular key.
s4ODELETETHECELLULARPHONEREGISTRATION
1. Touch the [
] key to delete the device.
!CONlRMATIONSCREENISDISPLAYED
2. Touch the [
]KEYTOCONlRMDELETE
Select the cellular phone
To change the current cellular phone to the other
device which is already registered, perform the
following operation.
1. Touch the [
]KEYTODISPLAYTHE$EVICE3ELECT
screen.
2. Touch the currently connected device, then press
[
] key to disconnect the active device.
4OUCHTHEDESIRED$EVICEKEYYOUWISHTOUSE0RESS
[
] key to select it as your active device. The
corresponding cellular phone is set as the current
telephone.
s )FTHEPOWEROFTHECELLULARPHONEISNOTTURNEDON
turn it on.
s 4HECELLULARPHONEMAYPROMPTTOACKNOWLEDGETHE
"LUETOOTHCONNECTIONORTOENTERTHE0ASS+EYCODE
OFTHISUNIT0ERFORMTHESEOPERATIONSACCORDINGTO
the message displayed.
4. Touch the [
] key to return to the previous
screen.
Obtaining the Phone Book data
3ENDINGTHE0HONE"OOKDATAFROMTHECELLULARPHONE
ENABLESYOUTOMAKEACALLUSINGTHE0HONE"OOK
function from this unit.
0ERFORMTHE/BJECT0USHTRANSFEROPERATIONOFTHE
0HONE"OOKDATAONTHECURRENTCELLULARPHONE
For details of the operation, see the operation manual
of the cellular phone.
Note:
s3OMECELLULARPHONESMAYNOTBEABLETOTRANSFERTHE
Phone Book data.
s3OMECELLULARPHONESCANNOTTRANSFERTHE0HONE"OOK
data when the hands-free mode is set or it is also
REGISTEREDINTHE"LUETOOTHMODE)NTHOSECASES
disable these functions from the cellular phone before
PERFORMINGTHE/BJECT0USHTRANSFER
s3OMECELLULARPHONESMAYTRANSFER0HONE"OOKDATA
automatically.
Telephone operations
Making a call using the Ten-Key pad
1. Touch the [ ]KEYTODISPLAYTHE4EN+EYPAD
screen.
%NTERTHETELEPHONENUMBERBYUSINGTHE4EN+EY
pad displayed on the screen.
3. Touch the [ ]3ENDKEYTOCALLTHEENTERED
number.
s 4HEFOLLOWING4ELEPHONE)NTERRUPTSCREENIS
displayed during phone call.
s 4OUCHTHE[ ] key to talk by using the cellular phone
ANDCANCELINGTHEHANDSFREEFUNCTION0RIVATE
-ODE4ORETURNTOTHEHANDSFREEMODETOUCHTHE
[
] key again.
s 4OUCHTHE[
] key to mute the microphone.Now you
can hear the other side, but the other side cannot
hear your side.
s 4OUCHTHE[
] key to hold the current phone call,
now you can answer to the other incoming call.
Touch again to talk with previous call
)FDURINGACALLWITHATHIRDPARTYCALLYOUCANKEEP
the current call to answer a third party or hang up
the current call to answer a third party. You can also
IGNORETHETHIRDPARTYCALLS