DVD Video Player Operations
Ejecting
a
disc
1.
Press the
[~]
button a disc ejects. "EJECT"
appears
in
the display. The play mode then
switches to Radio.
* If a disc is left
in
the ejected position for 15
seconds, the disc is automatically reloaded
(Auto reload).
In
this case, however, the play
mode will remain set to Radio.
Note:
•
If
you
force a disc into before auto reloading, this
can damage the disc.
DVD Video Operations
Watching a DVD-Video
After disc loading, the play mode is
automatically engaged.
• Button operation may not be allowed
depending on the story of the disc.
•
After
the
menu
screen
is
displayed
For normal DVD-Video discs, the
DVD
menu
screen appears.
After the DVD menu screen
is
displayed, select
an
item
in
the following operations and play it
back.
Showing
the DVD
menu
1.
Touch the screen to show the menu screen.
Touch the [MENU] key during playback.
The DVD menus appears.
The displayed contents may differ,
depending on the DVD software.
• Example showing DVD menu display
2.
To
select the
DVD
menu contents, touch the
[KEY]
key.
The "Cross KEY PAD"
(.
T
~
~)
is
displayed.
3.
Touch the [NUM]
key,
the display changes to
the "TEN KEY PAD" (0-9).
Touch the [+] key to return to the
"Cross
KEY PAD".
36 VRX755VD
4.
Select the DVD menu contents use either the
"Cross KEY PAD" on the "TEN KEY PAD"
according to the disc contents menu.
5.
Touch the [ENT] key and touch the [ESC]
key.
Switching
KEYPAD
position
When the KEY
PAD
becomes difficult to view
in
the menu display, you can move it to the other
side of the screen.
Stopping
playback
1.
Touch and hold the
[~/II]
key for 1 second
or longer during playback. Playback stops.
2.
To
resume playback. Touch the
[~/II]
key,
and playback resumes from the scene where
playback
is
stopped.
Pausing
playback
1.
Press the
[~/II]
button or touch the
[~/II]
key during playback. Playback pauses.
2.
To
resume playback. Press the
[~/II]
button,
and playback resumes.
To Next Page
Loading...
Need help?
General
