Clarion ProAudio VRX755VD User Manual

DVD Video Player Operations
Switching angles
On DVD discs in which video images have been
recorded
in two or more angles, you can switch
among the angles during playback.
This operation can be performed when the
"Setting up the angle mark display" function
(see
P. 33) is set to "ON".
1. Touch the screen.
2. Touch the [9] (Angle mark) key during
playback.
Each time you touch the
key, you can switch
among angles.
• Depending on the disc, up to 9 angles may
be recorded. For details, see the mark of
the disc
(ffi: Indicates multi-angle).
• Depending on the disc, angles may switch
smoothly or switch with a momentary still
image.
• When the power
is turned on and when the
disc
is changed with new one, the
language set at the time of factory
shipment is selected. If that language has
not been recorded, the language specified
on the disc.
• Depending on the disc, switching may
be
completely impossible or impossible on
some scenes.
• It may take time to switch among angles.
• Depending on the disc, scenes recorded
in
two or more angles may be played back.
Displaying the playback status
1. Touch the screen to display the menu, then
touch the [SUB]
key. Touch the [Po TIME] key
during playback. Playback status
is display
on the screen.
~
Title number
I Chapter/number
i- F Playback time
]-----ro -;-;';~o: 0 0: 19 l
2. Touch the screen to turn off the display. The
display will turn off after 7 seconds.
Watching a video CD
After disc loading, the play mode is
automatically engaged.
• Button operation may not be allowed
depending on the story of the disc.
• After the menu screen is displayed
For V-CD discs equipped with the PBC (Play
Back Control) function, the menu screen
appears. After the menu screen
is displayed,
select
an item in the following operations and
play it back.
Showing the V-CD menu (for V-CD
discs with PBC)
This key does not function on some discs.
1. Touch the screen to display the menu
screen. Touch the [MENU] key during
playback.
The V-CD menu appears.
The displayed contents may differ,
depending on the V-CD software.
• Example showing menu display
2. To select the V-CD menu contents, touch the
[KEY] key and use either the
"Cross KEY
PAD" or the
"Ten KEY PAD" according to the
disc contents menu.
Pausing playback
1. Press the [~/II] button. Playback stops.
To resume playback, press the [~/II] button,
and playback resumes from the scene where
playback is stopped.
VRX755VD 39

Clarion ProAudio VRX755VD Specifications

General

Brand	Clarion
Model	ProAudio VRX755VD
Category	Car Receiver
Language	English