SIRIUS Operation
*This changes the seek mode to manual mode
and
the "MANU" indicator
on
the display
lights. When this operation
is
performed
in
manual mode, the seek mode is engaged and
the "MANU" indicator
on
the display goes
off.
Note:
• The receiver automatically reverts
to
the seek
mode when the
[<
...}
or
[.->} button is
not
used for
7 seconds in the manual mode.
2.
Press the
[<<II1II]
or
[.-.>]
button. The receiver
moves to channels above
or
below the
current channel one by one.
*
The
same operation
can
be
performed
by
touching the screen to display the menu
screen, then touching the
[I<11III<II1II]
or
['-'~l
key.
3. Press and hold the [4tI] or
[.-.>]
button for 1
second
or
longer.
The receiver moves to seek channels below
or
above the current channel and the
channel found when either button is released
is received.
Recalling a
preset
station
A total of 18 SIRIUS stations can be stored (6-
SR1, 6-SR2 and 6-SR3). This allows you to
select your favorite SIRIUS stations and store
them in memory for later recall.
•
Using
the
LIST
screen
1. Touch the [LIST]
key.
2. Press the [BAND] button or touch the
[BAND] key to select the desired band.
3.
Touch the [DIRECT] key
(1
to 6) to select the
desired preset station.
*
Touch
and hold the [DIRECT]
key
for 2
seconds or longer
to
store the current station
into preset
memory.
4.
Touch the [RTN] key to return to the previus
mode.
•
Using
the
[DIRECT]
button
1.
Press the [BAND] button and select the
desired SIRIUS band (SR1, SR2
or
SR3).
2.
To
recall a stored SIRIUS station, press the
desired [DIRECT] button to select that
station.
*Press
and
hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset
memory.
Manual
memory
1.
Select the desired station with seek tuning,
manual tuning
or
preset tuning.
2.
Press and hold one
of
[DIRECT] buttons for
2 seconds
or
longer to store the current
station into preset memory.
Notes:
• When the name
of
a channel stored in memory is
changed
by
a broadcasting station, the display
may
show a channel name that differs from the
stored name.
• A channel stored in memory
may
be
discontinued
at
the option
of
the broadcasting station.
Category selection function
SIRIUS Radio allows you to select broadcast
channel category (contents).
Receiving stations selected
by
category
1. Touch the [SUB]
key.
.Selecting
from
preset
categories
1-1
. Touch the [PRESET] key and select a
category by touching a [DIRECT] key
(1
to 6) storing the desired category.
•
Selecting
by
displaying
all
categories
1-1
.Touch the [ITEM] key to display a
category.
1-2. Touch the
[T]
or
LA]
on the screen to
select the desired category on the screen.
1-3. Select by touching a [DIRECT] key
(1
to
6).
2. Press the
[<<II1II]
/ [...
>]
button or touch the
[~]
/
[~]
key to tune
in
a station. This
starts seek tuning and broadcast channels
that meet the specified category are
selected.
Notes:
• When the category selection mode is entered, the
category
of
the last received channel is displayed
first.
• The category selection mode is canceled when
no channel with the selected category can
be
found.
• Press the
l<"'}
or
l">J
button within 7 seconds
after
a channel has been set
to
continue seeking
channels up
or
down. The category selection
mode is canceled
and
normal reception is
resumed
if
no
operation is performed for 7
seconds.
54
VRX755VD
To Next Page
Loading...
Need help?
General
