37
2-12 ANTI-GRIND ON/OFF: With the anti-grind On (default) the ground-when-armed output will
be active during remote start operation. If accessories such as a voice module or window module
are added to the unit, it may be necessary to program this feature off.
tach learning
To learn the tach signal:
1. Start the vehicle with the key.
2. Within 5 seconds, press and hold the Override switch.
3. The LED will light constant when the tach signal is learned.
4. Release the Override switch.
DRW-96
To Next Page
Loading...
Need help?
General
