Clarion VRX8370R - Page 11

Small black and shiny dots inside the LCD
panel are normal for LCD products.
The LCD panel may stop temporarily when it
is opened or closed when the engine is
stopped or when it is cold. This is not a mal-
function. If this happens, repeat the opera-
tion.
Cleaning
e Cleaning the cabinet
Use a soft, dry cloth and gently wipe off the
dirt.
For tough dirt, apply some neutral detergent
diluted in water to a soft cloth, wipe off the dirt
gently, then wipe again with a dry cloth.
Do not use benzene, thinner, car cleaner,
etc., as these substances may damage the
cabinet or cause the paint to peel. Also, leav-
ing rubber of plastic products in contact with
the cabinet for long periods of time may
cause stains.
e Cleaning the LCD panel
The LCD panel tends to collect dust, so wipe
it off occasionally with a soft cloth.
xf Good
eur
The surface is easily scratched, so do not rub
it with hard objects.
Scratch
Beh,
VRX8370R 1 1