Clarion VRX8370R User Manual

Rear Vision Camera
Note:
e Use this camera as an auxiliary means to check-
ing obstacles.
Monitoring the rear vision camera
The rear vision camera can be connected to this
unit.
For the power supply of the camera, mount the
power box sold separately (CCA-147).
Note:
e This function is not available when the display is
stored.
1) Press the ADJ button [15] to select the CON-
FIGURATION display.
2) Slide the a-selector [1] to W (down) or A
(up) to move the cursor to “ACCESSORY”.
3) Slide the o-selector [1] to (right) to change
“OFF” to “ON”.
ods ue"
YgUAL
FF
) =
MONITOR
BOUNTY
Note:
e When “ACCESSORY” in the CONFIGURATION
display is turned on, the setting can be switched
even if the camera has not been connected.
4) Press the ADJ button [15] to return to the pre-
vious mode.
5) In radio or TV mode, press the VISUAL but-
ton [18] to switch to the camera mode.
In CD/MD changer mode, press the VISUAL
button [18] twice and go to the camera display.
Notes:
e When you shift into the reverse gear, the rear
vision camera is automatically turned on.
e When “ACCESSORY” is set to “ON’, the rear
vision camera display can be turned on only by
pressing the VISUAL button [18].
* To cancel the rear vision camera, change “ON” to
“OFF” of the “ACCESSORY’ in step 3) above.
VRX8370R 31

Clarion VRX8370R Specifications

General

Brand	Clarion
Model	VRX8370R
Category	Car Receiver
Language	English