Clarion VRX8370R User Manual

Other Functions
eS
Note:
e
The
following
operation
is
not
available
when
the
display is stored.
Switching
the
button
color
Button
color
can
be
switched
between
green
and
amber.
1)
Press
the
ADJ
button
[15]
to
select
the
CON-
FIGURATION
display.
2)
Each
time
you
slide
the
a-selector
[1]
to
>
(right),
the
button
color
toggles
between
green
(ILLUM1)
BC
3)
Press
the
ADJ
button
[15]
to
return
to
the
pre-
vious
mode.
Always
turning
on
the
button
illumi-
nation
on
the
operation
panel
The
button
illumination
on
the
operation
panel,
when
the
display
is
turned
upward,
can
be
switched
between
“AUTO”
and
“OFF”.
AUTO
:
Button
illumination
on
the
operation
panel
turns
on
for
5
seconds.
OFF:
Button
illumination
is
always
on
when
the
power
is
turned
on.
1)
Press
the
ADJ
button
[15]
to
go
to
the
CON-
FIGURATION
display.
2)
Slide
the
«-selector
[1]
to
W
(down)
or
&
(up)
to
move
the
cursor
to
“DCP
ILL’.
eee ILLUM1
ACCESSORY OFF
£Q ON
MONITOR. VISUAL
=DGP ALL OFF
OCP BCR ELS
ay COUNTRY
3) Slide the a-selector [1] to > (right) to switch
indication “AUTO” to “OFF”.
4) Press the ADJ button [15] to return to the pre-
vious mode.
* To set “AUTO” again, switch “OFF” to “AUTO”
manually.
32 VRX8370R
Titling
You
can
give
any
TV
station
or
CD
title
with
a
desired
name.
These
“titles”
are
retained
in
memory.
When
the
titled
station
is
tuned
in
or
the
CD
is
played,
its
title
appears
in
the
display.
Entering a title
Notes:
e
Up
to
20
TV
stations
can
be
titled.
Also
50
CDs
scan
be
titled.
e
/f
you
try
to
input
more
than
the
specified
number
of
titles,
“OVER
FLOW’
appears
in
the
display
and
further
input
becomes
impossible.
Delete
unnec-
essary
titles
to
input
new
ones.
e
ACD
title
can
be
entered
only
when
it
is
played.
1)
Select
a
station
or
CD
which
you
want
to
title.
2)
Press
the
TITLE
button
[16]
and
select
the
title
input
display.
BBG
201
:
FM1 98.1 P.CH2
acs
x
8
NAS oe
+
Each
time
you
press
the
TITLE
button
[i6],
the
display
switches
in
the
following
order.
‘eae
input
display
——»
TITLE
SELECT
Preset
mode
<——-
TITLE
CLEAR
3)
Press
No.
1
and
No.
2
of
the
Preset
buttons
[9]
to select the letter type.
No. 1 of the Preset buttons [9]: Upper case
letters and figures
No. 2 of the Preset buttons [9]: Lower case
letters and symbols
Slide the a-selector [1] to A (up), YW (down),
4 (left), or P (right) to move the pink cursor
to the letter you want to enter. Press ENT of
the a-selector [i]. The selected letter is
entered at the cursor (black) on the top of the
display.
« Repeat steps 3) and 4) above to enter the title.
+ If you entered the wrong letter, press No. 4 of
the Preset buttons [9] to backspace the cursor
(black) and enter the correct letter this time.
+ Press No. 5 of the Preset buttons [9]. The cur-
sor (black) moves to the right.
After entering the title, press and hold ENT of
the a-selector [1] for about 2 seconds.
* The title is stored when the beep sounds and
the previous mode is recalled.
=
5
—

Clarion VRX8370R Specifications

General

Brand	Clarion
Model	VRX8370R
Category	Car Receiver
Language	English