Clarion VRX8370R User Manual

Other Functions
Notes:
e The title list of the title select display in TV or CD
changer mode displays only titles for the preset
stations.
e After entering a title, if you change the reception
area, inconsistency between the entered title and
the frequency occurs.
e A title cannot be entered when the monitor is
locked.
Clearing the title
1) Select the mode where the title you want to
clear is stored (TV or CD changer mode).
2) Press the TITLE button [16] to go to the TITLE
CLEAR display.
3) Slide the o-selector [1] to W (down) or A
(up) to move the cursor to the title you want
to clear and press and hold ENT of the a-
selector [1] for about 2 seconds. The title is
cleared when the beep sounds.
4) Press the TITLE button [16] to return to the
previous mode.
Changing the title
1) Select the mode where the title you want to
change is stored (TV or CD changer mode).
2) Press the TITLE button [16] to select the title
input display.
Change the title using the procedure
described in step 3) above and in the sub-
section “Entering a title” (page 32).
Selecting the title
1) Select the mode where the title you want to
select is stored (TV or CD changer mode).
2) Press the TITLE button [16] twice to select the
TITLE SELECT display.
The entered titles appear after the title numbers.
1 4
2
3
4
5
6
* In CD mode, the TITLE SELECT display can-
not be selected.
* In radio, TV mode, slide the o-selector [1] to <q
(left) or P (right) to select a band.
3) Slide the a-selector [1] to W (down) or A
(up) to move the cursor to the title to be
selected. Press ENT of the a-selector [1] to
tune in to the selected station.
* Press the TITLE button twice to quit the
TITLE SELECT display.
VRX8370R 33

Clarion VRX8370R Specifications

General

Brand	Clarion
Model	VRX8370R
Category	Car Receiver
Language	English