Clarion VRX8370R User Manual

TV Mode Operations
A WARNING
For
your
safety,
the
driver
should
not
watch
the
TV
or
operate
the
controls
while
driving.
Please
note
that
watching
and
operating
the
TV
while
driving
are
prohibit-
ed
by
law
in
some
countries.
Watching TV
Notes:
e
For
safety,
the
VRX8370R
has
a
safety
function
which
turns
off
the
picture
when
the
car
is
moving,
so
only
the
audio
can
be
heard.
The
picture
can
only
be
watched
when
the
car
is
stopped
and
the
parking
brake
is
applied.
e After setting a country to be received, tune into a
station. For setting the country, see the subsection
“Setting the receiving country” (page 28).
e With the Display [12] stored in the source unit,
press and hold the BAND button [8} for approx. 1
second to toggle between the seek tuning and the
manual tuning. (When the seek tuning is selected,
“SRCH’ lighis.)
1) Press the FUNC button [7] to select TV mode.
2) Press the BAND button [8] to select a band
and mode.
Each time you press the BAND button [8], the
band and mode changes in the following
order:
eae —TV-2 —— VIR =]
3) Press one of the Preset buttons [9] to tune in
to a station.
Seek tuning
1) While appears in the display, press
and hold the BAND button [8] for about 1 sec-
ond to switch to the seek tuning.
2) Slide the a-selector [1] to (right) or <q (left)
to start the seek tuning. When a station is
found, it is automatically tuned in.
> : Seeks higher frequency stations.
<q: Seeks lower frequency stations.
* To stop the seek tuning, slide the a-selector [1]
to <q (left) or P (right).
Manual tuning
1) When does not appear in the display,
press and hold the BAND button |8} for about
1 second to select manual tuning.
*When manual tuning is selected,
appears in the display.
26 VRX8370R
2) Slide the a-selector [1] to > (right) or <q (left)
to tune in to a station.
+ Each time you slide the a-selector [1], the fre-
quency changes for the TV band.
*
Press
and
hold
the
a-selector
[1]
to
(right)
and
<q
(left)
to
increase
or
decrease
the
fre-
quency
continuously.
Preset memory function
A
total
of
12
stations
can
be
preset,
6
each
for
the
TV-1
and
TV-2
bands.
Note:
e
When
a
station
is
preset,
the
station
previously
stored
in
the
memory
at
that
position
is
cleared.
Manual memory function
1) Press the BAND button [8] to select a band.
2)
Slide
the
a-selector
[1]
to
®
(right)
or
<
(left)
to
tune
in
to
a
station.
3) Press and hold for about 2 seconds one of
the Preset buttons [9] where you want to
store the station. When a beep sounds, the
station is stored in that button.
* One station in each band can be preset to
each button.
Auto store function
Note:
e This function is not available when the display is
stored.
1) Press the BAND button [8] to select a band.
2) Press the DISP button to select PS/AS
mode.
* Press the DISP button [10} again to return to
preset mode.
When PS/AS mode is displayed, press and
hold No. 2 of the Preset buttons [9] for about
2 seconds. Stations with good reception are
automatically stored in preset buttons starting
from Preset button [9]. (After storing 6 sta-
tions, preset No. 1 station is tuned in and
auto storing ends.)
* in the display becomes pink.
* Stations with good reception are stored in the
order from the current station to stations with a
higher frequency. If there are fewer than 6 stations
with good reception, the auto storing returns to
the lowest frequency and resumes from there.
Note:
e When stations are preset by the auto store func-
tion, the station previously stored in the memory
at that position is cleared. If there are fewer than
3
baal
a ee ae tet tl a ein te te oe te ce aeiatde sl Lat patra beens. +.

Clarion VRX8370R Specifications

General

Brand	Clarion
Model	VRX8370R
Category	Car Receiver
Language	English