16. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
If an error display other than the ones described above appears, press the [RESET] button. If
the problem persists, turn off the power and consult your store of purchase.
W * hen the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
Display Cause Measure
Disc loading Disc is being read
Please wait, it may take several minutes
for some disc or storage device.
No Disc
Disc is dirty Clean disc with soft cloth
Disc is upside down Insert disc with label side up
Disc not present in loading
compartment
Insert disc
Unsupported
Disc
Disc is dirty Clean disc with soft cloth
Disc is upside down Insert disc with label side up
Unknown disc
Disc format is not compatible
with this unit
Change another disc.
Region Error
DVD is not compatible with
region code of unit
Use discs with corresponding regional
code.
Error Illegal mechanism operation
Press EJECT key for 5 seconds to reset
loading mechanism
38
English
VX603AU
To Next Page
Loading...
Need help?
General
