Clark NPR17 - A Message to CLARK Lift Truck Operators

The operator's manual is not a training manual. It is a guide to help
trained and authorized operators safely operate their lift truck by
emphasizing and illustrating the correct procedures. But, it cannot cover
every possible situation which may result in an accident. You must
watch for hazards in your work areas and avoid or correct them. It is
important that you know and understand the information in this manual
as well as to know and follow your company safety rules! Be sure that
your equipment is maintained in a safe condition. Do not operate a
damaged truck. Practice safe operation every time you use your lift
truck. Let's join together to set new standards in safety.
Remember, before you start operating this lift truck, be sure that you
understand all driving procedures. It is your responsibility, and it is
important to you and your family, to operate your lift truck safely and
efficiently. And be aware that the Federal Occupational Safety and
Health Act (OSHA) and state laws require that operators be completely
trained in the safe operation of lift trucks; if you think you need training,
ask your supervisor.
CLARK lift trucks are built to take hard work, but not abuse. They are
built to be dependable, but they are only as safe and efficient as the
operator and the persons responsible for maintaining them. Do not
make any repairs to this truck unless you have been trained in safe lift
truck repair procedures and are authorized by your employer.
A Message To CLARK Lift Truck Operators iii