Clark NPR17 - Nameplate and Safety Decals

Section 3. Know Your Truck
Truck Data and Capacity Plate
IMPORTANT
Know and understand the meaning of the data on your
truck's nameplate.
1. Truck registered name.
2. Type designation. These code letters signity the type ot construction
with safeguards against fire, explosion, or electrical shock hazards
for operation in nonclassified and classified areas. Check with the
proper authority before entering areas where flammable or explo-
sive material may be present.
3. Truck serial number and model number. Use these numbers when
requesting information or ordering parts from an authorized CLARK
dealer. The serial number is also stamped on the frame.
4. Attachment description (if any installed). The user must see that the
truck is marked to identify the attachment(s), including the weight of
the truck/attachment combination and truck capacity with the attach-
ment.
IMPORTANT
When attachments are added or if the truck is modified,
the capacity of the truck may be affected. Contact your
authorized CLARK dealer for new nameplate showing the
revised capacity.
5. Capacity rating, load center, and lifting height data. This shows the
maximum load capacity of this truck with relation to load centers and
fork heights. (See diagram on plate.) Personal injury and damage to
the truck can occur if these capacities are exceeded. DO NOT
EXCEED MAXIMUM SPECIFIED.
6. Truck weight, less load.
7. Battery weight.
8. Battery ampere-hour rating.
9. System voltage.
Nameplate and Safety Decals 3-3