Section
6.
Planned
Maintenance
PM
Report Form
A
planned
maintenance (PM) program
of
regular, routine inspections
and
lubrication
is
important
for
long life
and
trouble-free operation
of
your lift truck. Make
and
keep records
of
your inspections.
Use
these
records
to
help
establish
the
correct
PM
intervals
for
your
application
and to
indicate maintenance required
to
prevent
majer
problems from
occurring
during
operation.
As
an aid in
performing
and
documenting
your
PM
inspections,
CLARK
prepared
an
Electric
Truck
Planned Maintenance Report Form
(PM
Report
Form).
Copies
of
this form
may be
obtained
from
your authorized
CLARK
dealer.
We
recommend that
you use
this form
as a
checklist
and
a
record
of
your inspection
and
truck
condition.
The
maintenance procedures outlined
in
this manual
are
intended
to be
used
in
conjunction with
the PM
Report Form. They
are
arranged
in
groupings
of
maintenance work that
are
done
in a
logical
and
efficient
sequence.
You
make check marks
or
entries
on the PM
Report Form when
you
perform
the PM.
Please notice
on the
form
a
special
coding
system
for
indicating
the
importance
of
needed repairs and/or adjustments.
When
you
have finished
the PM
inspections,
be
sure
to
give
a
copy
of
the
report
to the
designated
authority responsible
for
lift truck mainte-
nance.
Do
not
make repairs
or
adjustments unless authorized
to do so.
For
safety,
it is
good practice
to:
•
Remove
all
jewelry (watch, rings, bracelets, etc.) before working
on
the
truck.
•
Disconnect
the
battery
before
working
on
electrical components.
•
Always wear
safety
glasses. Wear
a
safety (hard)
hat in
industrial
plants
and in
special work areas where protection
is
necessary
and
required.
PM
Report Form
6-11
To Next Page
Loading...
