Clark NPR17 - Page 88

Visual Inspection
Begin the PM routine with a visual inspection of the lift truck and its
components.
1. Walk around the truck and take note of any obvious damage and
maintenance problems. Check for loose fasteners and fittings.
2. Check to be sure all capacity, safety, and warning plates or decals
are attached and legible.
NOTICE
NAMEPLATES AND DECALS: Do not operate a lift
truck with damaged or lost decals and nameplates.
Replace them Immediately. They contain Important
information.
3. Inspect the truck for any sign of external leakage: transmission
fluid, etc..
4. Check for hydraulic oil leaks and loose fittings.
CAUTION
HYDRAULIC FLUID PRESSURE: Do not use your hands
to check for hydraulic leakage. Fluid under pressure
can penetrate your skin and cause serious Injury.
5. Be sure that the driver's overhead guard, load backrest extension,
and safety devices are in place, undamaged, and attached
securely.
Then check all of the critical components that handle or carry the load.
6-12 Visual Inspection