Need help?Do you have a question about the Clavis Type 7 and is the answer not in the manual?
General| Brand | Clavis |
|---|---|
| Model | Type 7 |
| Category | Measuring Instruments |
| Language | English |
Read and understand this manual before operating the CLAVIS Belt Frequency Meter.
Never use the CLAVIS Belt Frequency Meter on moving belts.
Covers precautions for handling, environment, and maintenance to ensure safe operation.
Details the CLAVIS Belt Frequency Meter as a two-component system with sensors and meter.
Describes the optical sensor and its function in detecting belt vibrations.
Describes the acoustic sensor and its method for detecting belt vibrations.
Step-by-step instructions for initial use with the optical sensor.
Step-by-step instructions for initial use with the acoustic sensor.
Explains the functions of the ON/OFF, SPAN, MASS, UP, DOWN, and MEM keys.
Describes the meter's audio signals and visual display for readings and status.
Details the optical and acoustic sensor types and their applications.
Explains how to check battery status and condition.
Details the process of charging the meter's batteries.
Describes the serial communication protocol and data output format.
Guides on plugging in the sensor, powering on, and entering span/mass data.
Explains saving/recalling data, taking measurements, and toggling units.
Tips on sensor placement, span length, and reading consistency.
Advice for low tension belts and analyzing readings for component issues.
Details the meter's frequency range and maximum tension calculation capacity.
Advice on selecting belt span for multi-shaft drive systems.
Step-by-step guide for performing a calibration check with a tuning fork.
Information on returning the meter for professional recalibration and certification.
Details measurement accuracy, ranges, and environmental conditions.
Lists specifications for sensors, power supply, and battery life.
Provides constants for force, length, weight, and span length calculation.
Explains the physics behind belt tension and vibration frequency.
Describes the principles of optical and acoustic vibration detection.
Outlines warranty coverage, exclusions, and customer service contact.
Presents suggested tension and mass values for various timing belts.
Lists tension and mass data for belts like Z, A, B, C, D, SPZ, SPA, SPB.
Details tension and mass for cogged belts (SPC, 3V, 5V, 8V, ZX, AX).
Provides further tension and mass values for cogged belts (BX, CX, XPZ, XPA, XPB, XPC, 3VX, 5VX).
Provides tension and mass values for ribbed belts (PJ, PK, PL, PM).
To Next Page