EasyManua.ls Logo

Clear-Com EclipseHX Series - IP Interface Card; Interface Card

Clear-Com EclipseHX Series
145 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.3.5 IVC-32 IP interface card
The IVC-32 interface allows the Eclipse HX matrix to connect to IP enabled V-Series panels,
other matrix frames and Concert users using an IP network.
Each IVC-32 interface comprises:
A front card with a reset button and various status indicators.
A rear card with eleven RJ-45 ports giving eight E1/T1 ports (not used), DECT sync
in and out (not used) and a LAN port for IP connectivity.
Each IVC-32 front card has status LEDs for power, port activity and LAN status.
The LAN indicators show whether there is a LAN connection and the IP activity on the LAN
port.
Clear-Com recommends fitting IVC-32 cards in the leftmost available slots (with the MVX-A16 cards)
on the
Eclipse HX-Median.
IVC-32 Redundant Card
You can add an IVC-32 Redundant Card that provides fail-over redundancy for one or more IVC-32
Cards in the matrix.
An IVC-32 Card will fail-over to the IVC-32 Redundant Card under the following conditions:
• All configured
VoIP ports are unconnected for longer than 90 seconds.
• The IVC-32 Card is detected as absent from the VME backplane.
• It is requested
via the EHX Event Log.
A switch back from a redundant card back to a failed card only occurs under the following condition:
The redundant card has failed. If the original card is still in error, then it will switch back and
forward until corrective action is taken.
3.3.6 LMC-64 interface card
The LMC-64 interface allows the Eclipse HX-Median to provide Production Maestro Pro
(routing software) clients with audio level metering of partylines (conferences) and four-wire
ports over an IP network.
Each LMC-64 interface comprises:
A front card with a reset button and various status indicators.
A rear card with eleven RJ-45 ports giving eight E1/T1 ports (not used), DECT sync
in and out (not used) and a LAN port for IP connectivity.
Each LMC-64 front card has status LEDs for power, port activity and LAN status.The LAN
indicators show whether there is a LAN connection and the IP activity on the LAN port.
24
Eclipse HX-Median User Guide

Table of Contents

Related product manuals