Clear-Com EclipseHX Series - User Panels

EHX runs on the following versions of Windows:
• Microsoft Windows Server 2003 SP2 (32 bit and 64 bit).
• Microsoft Windows Server 2003 R2 (32 bit and 64 bit).
• Microsoft Windows Server 2008 SP2 (32 bit and 64 bit).
• Microsoft Windows Server 2008 R2 (64 bit).
Note:
Only 64 bit is supported, as Windows Server 2008 R2 is not available for 32 bit.
• Microsoft Windows XP SP3 (32 bit and 64 bit).
• Microsoft Windows Vista SP2 (32 bit and 64 bit)
• Windows 7 (32 bit and 64 bit).
When running EHX on Windows operating systems, the client and server can run on
separate machines connected over a network. You can use EHX to perform a wide range of
configuration tasks, including:
• Assigning labels (names) to ports and user panels.
• Creating point-to-point and fixed group (partyline) communications between
connected audio devices.
• Enabling, limiting or disabling features of any connected user panel or card.
• Configuring connections between matrix frames .
Tip: The above list is not definitive. For more information about the capabilities of EHX, see
EHX Help.
The EHX system can be set up to run on a client/server model over a network, allowing the
system administrator to control multiple matrices remotely.
3.6 User panels
The following Clear-Com user panels are compatible with the Eclipse HX-Median:
• V-Series panels, including expansion panels.
• I-Series panels, including expansion panels.
Note:
For more information about installing, using and maintaining user panels, and connecting
user panels to the matrix, see either:
• The V-Series Panels Guide.
• The I-Series Panels Guide.
26
Eclipse HX-Median User Guide