The ClearSounds A1600BT DECT 6 phone is com-
patible with these assistive listening devices:
• Hearing aids that are equipped with telecoil
(T-coil)
• Audio neckloops, with or without built-in
microphones.
T-Coil
To use the phone with T-coil-equipped hearing aids
1. Move your hearing aid T-switch to
the T position.
2. Hold the handset close to your
hearing aid.
Neckloops
Neckloops amplify phone sound in T-coil-equipped
hearing aids.
To use an audio-only neckloop
Audio-only neckloops do not include microphones,
so you must speak through the handset or through
the base speakerphone.
1. Connect an audio neckloop to the
3.5 mm AUDIO NECKLOOP jack
on the left side of the phone base.
To Next Page