EasyManua.ls Logo

Clevo C4505 - Bluetooth Module Configuration

Clevo C4505
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Modules & Options
Bluetooth Module 7 - 27
7
Bluetooth Module
There are two Bluetooth module options available for this computer. If your pur-
chase option includes the Combination Wireless LAN & V3.0 Bluetooth module
then install the driver as instructed overleaf (see “Bluetooth & WLAN Combo Set-
tings” on page 7 - 29 for configuration instructions).
If your purchase option includes a standard V2.1 Bluetooth module, then the op-
erating system’s Bluetooth Devices control panel is used to configure the Bluetooth
settings in Windows 7, and therefore does not require a driver (see “Standard Blue-
tooth Configuration in Windows 7” on page 7 - 36).
Use the Fn + F12 key combination to toggle power to the Bluetooth module
(see
“Function Keys & Visual Indicators” on page 1 - 9
)
. When the Bluetooth module is
powered on the indicator will briefly be displayed.
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F12 key com-
bination to toggle power to
the Bluetooth module, and
check the LED indicator to
see if the module is pow-
ered on or not (see Table 1
- 2, on page 1 - 9/ Table 1
- 1, on page 1 - 7).
Bluetooth Data Transfer
Note that the transfer of data between the computer and a Bluetooth enabled device is supported in
one direction only (simultaneous data transfer is not supported). Therefore if you are copying a
file from your computer to a Bluetooth enabled device, you will not be able to copy a file from the Blue-
tooth enabled device to your computer until the file transfer process from the computer has been com-
pleted.

Table of Contents

Related product manuals