Modules & Options
7 - 32 Bluetooth Module
7
Bluetooth Networking Setup
This information applies to the combo Bluetooth and WLAN module only.
1. Make sure the Bluetooth module is powered on.
2. Double-click the My Bluetooth application on the desktop (or access it from the
Programs/All Programs menu).
3. Click My Bluetooth Settings (see Figure 7 - 17 on page 7 - 29).
4. Click Network Settings (make sure the Bluetooth module is powered on.
5. Click Enable Bluetooth Network and click OK.
6. A message will appear in the taskbar to confirm that the network driver has been
installed.
To Next Page
Loading...
