18
To Recall FM Transmitting Frequency Saved in Memory
1. Press LINK, and the screen will show the current FM Transmitting Frequency.
2. Press a X control key (where X is from 1 to 4) to select a corresponding FM memory preset FX
and the screen will show 《 FX Frequency MHz 》where frequency is the frequency saved in
FM preset memory FX.
3. Press the Rotary Knob, the CAD15 will set and transmit FM signal at this new frequency. The
screen will display the new frequency as the current frequency.
4. Press FM preset of your car radio corresponds to the same frequency from step 2 if you have
previously saved for DAB reception. Otherwise, tune the car radio to the same FM frequency.
To Force Immediate FM Transmitting Frequency Change
While listening to a DAB station, if you hear static noise or a FM program, this function can be used
in either AFC or AutoScan mode to force a FM transmission frequency change immediately.
1. In AFC_H or AFC_L Mode
a) Press and hold LINK, the bottom of the screen will show 《 RETUNING 》and then
《 Frequency1 to Frequency2 》 where Frequency1 is the current frequency and
Frequency2 is the new frequency that CAD15 will set and use to transmit FM signal and
force radio to tune to the same frequency automatically.
2. In AutoScan Mode
a) Operating on CAD15
Press and hold LINK, the screen will show《 RETUNING 》 and when the tuning is
complete, it will display the new frequency that CAD15 has set and use to transmit FM
signal.
b)
Operating on Car Radio
Manually change your car radio’s FM frequency to match the new CAD15 transmitting
frequency setup.
To Next Page
Loading...
Need help?
General