19
MENU SETTINGS
You must press and hold MENU button to enter the menu function, rotate the Rotary Knob [◄] [►]
to select a menu setting, and then press the Rotary Knob to confirm the selection to return to the
menu selection screen. Then, you must press the BACK key or after 5 seconds timeout, to return to
the DAB or Audio Streaming display mode.
To Enable DLS/DL+ Display
1. In the menu function, rotate the Rotary Knob [◄] [►] until the selection is 《 DAB
Radio Text 》.
2. Press the Rotary Knob to enter radio text selection operation.
3. Then you can rotate the Rotary Knob [◄] [►] until the selection is 《 1 LINE 》, 《 3 LINES 》,
or 《 TEXT OFF 》 to enable the DLS/DL+ display on screen in one line, three lines, or disable
the display.
4. Finally, press the Rotary Knob to set the DLS/DL+ display.
To Set DAB Sorting Order
There are two ways that CAD15 can sort the stations in the station list, it can be either sorted by
alphabetical order of the station name, or by DAB ensemble (channel) ID. In each DAB ensemble,
the stations are ordered according to the station ID and not necessary by alphabetical order of the
station name.
1. In the menu function, rotate the Rotary Knob [◄] [►] until the selection is《 DAB List
Order 》.
2. Press the Rotary Knob to enter DAB sorting selection operation.
3. Then you can rotate the Rotary Knob [◄] [►] until the screen shows《 ALPHABET 》or
《ENSEMBLE 》
4. Finally, press the Rotary Knob to set the sorting method for DAB station list.
To Perform DAB List Reset
1. In the menu function, rotate the Rotary Knob [◄] [►] until the selection is《 DAB List
Reset 》.
2. Press the Rotary Knob to perform a reset operation for DAB station list.
3. Then you can rotate the Rotary Knob [◄] [►] until the screen shows《 YES 》or《 NO 》
4. Finally, press the Rotary Knob to confirm or cancel.
To Enable Bluetooth
When you enable Bluetooth, you will be able to pair and connect CAD15 to your mobile device
(Smartphone or Tablet) for audio streaming.
To Next Page
Loading...
Need help?
General