CLIVET WiSAN-YME 1 S 8.1 - Default Temperatures

121
Control
9.12 Default temperatures
DEFAULT TEMPERATURES has 3 modes for setting the
temperature:
DEFAULT TEMP.\CLIM.TEMP. SET.\ECO MODE.
Default temperatures
The DEFAULT TEMP. function is used to set temperatures for
heating or cooling mode in dierent time slots.
The DEFAULT TEMP. function does not work under the
following conditions.
1 When AUTO mode is on.
2 When the TIMER or WEEKLY SCHEDULE function is on.
Select
MENU > DEFAULT TEMPERATURES > DEFAULT TEMP.
Press OK.
When the DOUBLE ZONE function is on, the DEFAULT
TEMP. function only works for zone 1.
DEFAULT TEMPERATURES 1/4
DEFAULT
TEMP.
CLIMATE
TEMP. SET.
ECO
MODE
NO. TIME TEMP.
1 00:00 25° C
2 00:00 25° C
3 00:00 25° C
DEFAULT TEMPERATURES 2/4
DEFAULT
TEMP.
CLIMATE
TEMP. SET.
ECO
MODE
NO. TIME TEMP.
4 00:00 25° C
5 00:00 25° C
6 00:00 25° C
Press LEFT, RIGHT, Down, Up to scroll and press Down, Up to
adjust the time and temperature.
When the cursor is on n, as on the following page.
DEFAULT TEMPERATURES 3/4
DEFAULT
TEMP.
CLIMATE
TEMP. SET.
ECO
MODE
NO. TIME TEMP.
1 00:00 25° C
2 00:00 25° C
3 00:00 25° C
OK
SELECT
Press OK and the symbol n changes to .
Timer 1 is selected
Press OK again and the symbol changes to n.
Timer 1 is deselected
Press LEFT, RIGHT, Down, Up to scroll and press Down, Up to
adjust the time and temperature.
6 time slots and 6 temperatures can be set.
DEFAULT TEMPERATURES 4/4
DEFAULT
TEMP.
CLIMATE
TEMP. SET.
ECO
MODE
NO. TIME TEMP.
1 00:00 35° C
2 00:00 25° C
3 00:00 35° C
OK
CANCEL
Example: it is now 9:00 a.m. and the temperature is 35°C.
01-01-2021 9:00
7
OFF
ON
OFF
ON
7
OFF
ON
OFF
ON
7
OFF
ON
OFF
ON
9:00