CLIVET WSAN-XIN 21 - Page 37

37
7 - CONTROL
CLOCK SETTING
display
press
Ai
selct CLOCK menu
/
Cl
access
Hour
choose among :
- hour : HOUR
- date : DATE
- year : YEAR
/
YEAR
confirm
! Value flashing !
3 sec
! 2010 !
set the value
/
! 2011 !
confirm
2011
back to the previous menu
CHANGE THE OPERATING MODE
display
press
2 sec
COOL
choose among
- standby, off :STBY
- cool : COOL
- heat : HEAT
- DHW : AS
+
HEAT
confirm
WATER SETPOINT MODIFICATION
display
press
Ai
select SP menu
/
SP
access
COOL
choose among :
- COOL
- HEAT
- AS
/
ACS
confirm
50
set the value
/
55
confirm
55
back to the previous menu
DISPLAY OF INPUTS - OUTPUTS
display
press
Ai
choose among
Ai : analogical inputs
di : digital inputs
AO : analogical outputs
dO : digital outputs
/
di
access
diL1
press to see the value
for digital inputs :
0 = input not active - open
1 = input active - closed
scroll the list
/
diL4
ON - OFF
display
press
3 sec
OFF
press
3 sec
ON
Off the unit is immediately stopped without respecting any timing.
Stanby the antifreeze function is active ( pump ON for water temperature < 5°C )
The circulator anti-blocking function is active ( pump ON at predefined intervals)
*
*