9
3 - POSITIONING
3.4 CONDENSATE WATER
When a heat pump is running it produces a considerable
amount of water due to the defrosting cycles of the external
coil.
The condensation must be eliminated in a manner to avoid
wetting pedestrian areas.
The unit anti-freeze electric resistance prevents the ice from
forming inside the tray.
With extensive very cold outdoor temperatures, condensation
could freeze outside the unit blocking the flow and causing a
slow build-up of ice; therefore special attention must be paid
to eliminating condensation, raising the unit off the ground and
evaluating whether antifreeze elements should be installed.
A
Drain pan
Unit support
Condensate discharge connection Ø 13
B
C
C
Provide windbreaks in locations with strong winds
Connection of the condensate discharge Ø 13
C
A
B
C
To Next Page
Loading...
