byproducts either harmful to people nearby or in violation of any local or national laws or
regulations. In particular, do not use this device to process polyvinyl chloride (PVC),
TEFLON, or other halogen containing materials under any circumstances.
• Users of this fiber laser are responsible for ensuring that every person present during
operation has sufficient PPE to avoid any injury from emissions or byproducts of the
materials being processed. In addition to the protective laser eyewear discussed above, this
may require goggles, masks or respirators, gloves, and other protective outer clothing.
• Users must exercise special caution when working with conductive materials as buildup
of their dust and ambient particles may damage electrical components, cause short circuits,
or produce other effects including reflected laser radiation.
This machine can be safely used with the following materials:
• Aluminum
• Brass
• Carbide
• Gold
• Silver
• Steel
• Stone, including Granite, Marble, etc.
• Titanium
• Tungsten
This machine can be used with some other metals, hard plastics, and other materials with
some care. For other materials, if you are unsure about its safety or laser ability with this
device, seek out its material safety data sheet (MDS). Pay especial attention to information
about safety, toxicity, corrosiveness, reflectivity, and reaction(s) to high heat. Alternatively,
contact our support department for further guidance.
This machine CANNOT be used with the following materials or with any materials which
include them:
• Artificial Leather containing Hexavalent Chromium (Cr [VI]), due to its toxic fumes
• Astatine, due to its toxic fumes
• Beryllium Oxide, due to its toxic fumes
• Bromine, due to its toxic fumes
• Chlorine, including Polyvinyl Butyral (PVB) and Polyvinyl Chloride (PVC, Vinyl, Cintra,
etc.), due to its toxic fumes
• Fluorine, including Polytetrafluoroethylenes (Teflon, PTFE, etc.), due to its toxic fumes
To Next Page
Loading...
Need help?
General
