Cloudray LiteMarker - Troubleshooting: No Engraving; Troubleshooting: Other Laser Errors

Cloudray Laser System
Cloudray (Jiangsu) Co., Ltd.
42
No Engraving
despite Laser
Output
Confirm that the material can be safely engraved with this device.
Correct the focus by adjusting the height of the laser arm.
Adjust the software parameters to create greater intensity.
Have a technician check the control panel, scanning lens, and its
power supply. Correct any problems or replace the part.
Other Laser Errors
Have a technician check the fiber laser source and the mainboard.
Correct any problems or replace the part.