MAN.219 Rev.8 ENG - Use and maintenance manual S19N page 9 of 71
2 Description and pur-
pose
2.1 Definition
The machine is called S19N and it is a mobile elevating work platform
(MEWP):
• machine/device intended for moving persons, tools and material to
working positions, consisting of at least a work platform with con-
trols, an extending structure and a chassis (ANSI/SAIA 92.20 par.
3);
• mobile machine intended to move persons to working positions,
where they are carrying out work from the work platform, with the
intention that persons are getting on and off the MEWP only at ac-
cess positions at ground level or on the chassis and which consists
as a minimum of a work platform with controls, an extending struc-
ture and a chassis (EN 280 par. 3.1).
It is forbidden to access to or exit from the work platform at dif-
ferent levels.
2.2 Machine purpose
The MEWP S19N is a machine which enables the operators to reach the
working place when this is high-positioned.
The machine has been designed for an essentially vertical use. It
must be transported only when it is totally folded in the transport po-
sition.
➔The use of the machine is allowed only to professional staff,
properly trained and specialized.
2.3 Description of the main components
Picture 3: main components of the MEWP.
To Next Page
Loading...
Need help?
General
