MAN.219 Rev.8 ENG - Use and maintenance manual S19N page 44 of 71
6 Electrical system
The MEWP is electrically supplied when the key is inserted and rotated in
position 1 (Picture 4).
Periodically check the efficiency of the electrical system: battery, alterna-
tor, regulator alternator charge.
The electrical system is attached to this manual.
Any operation requiring interventions on the components of
the machine, shall carried out by authorized and trained staff.
It is forbidden to replace the components for non-authorized staff.
Many components of the MEWP have been calibrated: a correct
calibration of these parts (which is possible only in C.M.C. or in
authorized Services) is important to assure the safety of the
machine.
To Next Page
Loading...
