CMC S19N - 4.7 Safety rules; 4.7.1 Before and during the movements with MEWP in transport position; 4.7.2 Before positioning the MEWP

MAN.219 Rev.8 ENG - Use and maintenance manual S19N page 31 of 71
Picture 24: electropump activation buttons.
To activate the emergency electropump on emergency control
box in turret, first remove the lead seal from the red cap and
then activate the internal black lever (Picture 24).
4.7 Safety rules 
THE NON-COMPLIANCE WITH ANY OF THE FOLLOWING
SAFETY RULES, MAY CAUSE SERIOUS DAMAGES TO
PEOPLE, THINGS AND PARTS OF THE EQUIPMENT OR THE
MACHINE.
4.7.1  Before and during the movements with MEWP in
transport position
It is forbidden to rent the MEWP without non-trained operators and
staff.
➔ The hirer is responsible for the training of his operators and of the staff
renting the MEWP. C.M.C. s.r.l. declines any responsibility coming
from damages to people and/or things due to the inexperience of these
operators;
Do not use the MEWP under drug or alcohol effect;
Do not use the MEWP under stress conditions;
Do not use the MEWP if you suffer from dizzy spells;
➔ Before driving, check the tires wear state and the correct inflation
pressure;
➔ Drive with caution, respecting the highway code;
➔ Take the MEWP height overall dimensions into consideration during
circulation, in order to avoid clashing against bridges, galleries, under-
passes and other obstacles;
Do not use the MEWP to perform drawing or pushing operations;
Do not use the MEWP as an off-road vehicle;
4.7.2  Before positioning the MEWP
➔ Carefully and chronologically follow the instructions given in this man-
ual;
Use the MEWP only with the environmental operating conditions in-
dicated in paragraph 4.1;
➔ Check that the staff allowed to use the MEWP is skilled and
trained, and that they know the MEWP use and maintenance
rules;
➔ Check that the safety devices are working and efficient; some compo-
nents (outriggers integrated groups, max pressure valve on the turret),
important for the MEWP safety, are calibrated in C.M.C. plants and the
containers are sealed before delivering of the MEWP to the customer.
It is strictly forbidden to tamper with such components. The absence
of the sealing within the machine warranty terms causes the imme-
diate retraction of the warranty as well as the accountability – by the
user – of the liabilities coming from an incorrect functioning of the
safety devices.