MAN.219 Rev.8 ENG - Use and maintenance manual S19N page 45 of 71
7 Hydraulic system
The MEWP hydraulic system is attached to this manual.
The pressure setting of the relief valves must correspond to the following
values:
A radiator for cooling the hydraulic circuit oil and a biodegradable hydraulic
oil can be provided as *optional. In case of its refill or replacement, it is im-
perative to comply with the technical specifications of the product already
present in the system.
All the operations requiring the intervention on the compo-
nents of the machine, shall be carried out by authorized and
trained technical staff.
Non-authorized staff shall not replace any of the components. Many
components have been calibrated: a correct calibration of these
parts (possible only in C.M.C. or in authorized Services) is nec-
essary to ensure the safety of the machine.
To Next Page
Loading...
