MAN.219 Rev.8 ENG - Use and maintenance manual S19N page 35 of 71
All safety devices could wear out and lose their calibration, it is
therefore necessary to control and keep them in perfect work-
ing order.
Do not rely totally on these devices to assess your working and
safety conditions; in any case, the operator must have a proper and
conscious use of the machine.
5 Markings
On the machine there are the following marks.
➔ Before using the MEWP, it is compulsory to check the presence
and the perfect readability of these marks. In case of absence
or decay of the marks, contact the Service.
Picture 25: identification plate (fac-simile).
To Next Page
Loading...
