CMC S28 User Manual

MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 79 of 138
4.8 Safety devices
The machine is equipped with safety devices
designed to prevent the occurrence of
dangerous situations for the operator. Before
starting any operation, it is important that the
operator checks the perfect functioning of
these devices.
The non-functioning of a safety device, caused
by a failure or tampering, can cause serious
injury damage to the machine and
consequently endanger life operator. The
manufacturer has designed the machine and
its devices in order to guarantee the maximum
safety for its customers; however, the devices
must be checked periodically as described in this
manual and must never be tampered with.
Do not intervene on your own safety devices. In
case of tampering, the manufacturer declines
all responsibility about any accidents
attributable to these interventions.
In case you notice non-functioning of a safety
device, ask for help to C.M.C. Service.
The following are the safety devices available to the user,
in order to understand the behavior of the machine and
the possible work sequences:
Electrical/electronic devices:
• Removable key for the MEWP start;
• Emergency stop switches, mechanically blocked,
on the two control stations and on the outriggers
station;
• Microswitch blocking the outriggers controls with
booms lifted and if the extension is not in
withdrawn position;
• Microswitch for outriggers end-of-stroke;
• Protection fuses against brownout, both on the
power circuit and on the control circuit;
• All machine controls hold-to-run;
• Moment limiter device;
• Load limiter device;
• Inclinometer;
• Anti-collision system;
• Basket pin microswitch;
• Outriggers pins microswitches;
• Emergency bypass;
• Blocks bypass.
Hydraulic devices:
• Max pressure valves;

CMC S28 Specifications

General

Brand	CMC
Model	S28
Category	Boom Lifts
Language	English