EasyManuals Logo

CMC S28 User Manual

CMC S28
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 7 of 138
1.4 TÜV certification
C.M.C. s.r.l. states under its own responsibility that S28
was designed and produced in compliance with US
standards ANSI/SAIA A92.20:2020 and that the
machine is identical to the model submitted to control
and test for the “TÜV certification” by TÜV SÜD
America Inc.
TÜV SUD America Inc. is an OSHA recognized NRTL
and a Standards Council of Canada accredited
certification body.
1.5 Classification
The mobile elevating work platform (MEWP) S28
belongs to group B: the vertical projection of the area
center of the MEWP in different platform configurations
specified by the manufacturer can be outside the
tipping lines (EN 280 par. 1.4 - ANSI/SAIA A92.20 par.
3).
As for the displacement, it belongs to type 1: travelling
is only allowed with the MEWP in its transport
1
Loading cycle: a cycle starts from the access position,
continues performing the work and finishes returning to the
access position.
configuration or in the stowed position (EN 280 par. 1.4
- ANSI/SAIA A92.20 par. 3).
1.6 Loading cycles
The machine is expected to last for 40.000 loading
cycles
1
(i.e. 10 years, for 40 weeks per year, for 20
hours per week, for 5 loading cycles per hour).
Within this term of time, the machine must undergo
at least 2 (two) deep checks (structural, mechanical,
electric, elements, etc.), in case of particularly heavy
uses (frequent use at the performance limit,
particularly unfavorable environmental conditions such
as steel plants, paper mills and so on) it is better to
increase checks. Anyway, it is a good rule to have
the state of the machine checked by the
manufacturer factory or by an authorized
workshop, at least every 1500 - 2000 hours of work
or once per year.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CMC S28 and is the answer not in the manual?

CMC S28 Specifications

General IconGeneral
BrandCMC
ModelS28
CategoryBoom Lifts
LanguageEnglish

Related product manuals